[1]	HIRSCH C, DENTON J. Through flow calculations in axial turbomachines[R]. Neuilly sur Seine, France: AGARD, 1981. Cited in this article [1]

[2]	DENTON J. Designing in three dimensions[R]. Neuilly sur Seine, France：AGARD, 1994. Cited in this article [1]

[3]	程荣辉. 轴流压气机设计技术的发展[J]. 燃气涡轮试验与研究， 2004, 17(2):1-8. CHEN Ronghui. Development of design technology for axial compressoe[J]. Gas Turbine Experiment and Research, 2004, 17(2):1-8. Cited in this article [1]

[4]	LEJAMBRE C R, ZACHARIAS R M, BIEDERMAN B P, et al. 1995 ASME gas turbine award paper: development and application of a multistage navier—stokes flow solver, part Ⅱ： application to a high-pressure compressor design[J]. Journal of Turbomachinery, 1998, 120(2):215-223. Cited in this article [2]

[5]	STEVEN R, ROBORT A. Redesign of a 12-stage axial-flow compressor using multistage CFD[C]//ASME Turbo Expo, New York, 2001. Cited in this article [1]

[6]	赵晓路. 使用槽道平均模型的多叶片排N-S方程并行计算[C]//工程热物理学会热机气动热力学学术会议. 杭州， 1998. Cited in this article [1]

[7]	陈乃兴，张宏武，徐燕骥，等. 多级轴流压气机三维气动设计的一种快速方法[J]. 工程热物理学报， 2003, 24(4):583-585. CHEN Naixing, ZHANG Hongwu, XU Yanji, et al. Numerical simulation of leakage flow in rotor tip clearance of a transonic turbine stage[J]. Journal of Engineering Thermophysics, 2003, 24(4):583-585. Cited in this article [1]

[8]	赵斌，刘宝杰. 跨声串列转子及前后排叶片匹配特性分析[J]. 航空学报， 2011, 32(6):978-987. ZHAO Bin, LIU Baojie. Effects of relative position of forward and aft blades on performance of tandem rotor[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(6):978-987. Cited in this article [1]

[9]	李清华，安利平，徐林，等. 高负荷压气机设计技术探索研究与试验验证[J]. 航空学报， 2017, 35(1):1-12. LI Qinghua, AN Liping, XU lin, et al. Exploratory research and test verification of high load compressor design technique[J]. Acta Aeronautica et Astronautica Sinica, 2017, 35(1):1-12. Cited in this article [1]

[10]	SICOT F, DUFOUR G, GOURDAIN N. A time-domain harmonic balance method for rotor/stator interactions[J]. Journal of Turbomachinery, 2012, 134(1):1-13. Cited in this article [1]

[11]	HALL E J. Aerodynamic modelling of multistage compressor flow fields Part 1: Analysis of rotor-stator-rotor aerodynamic interaction[C]//Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 1998, 212(2): 77-89. Cited in this article [1]

[12]	柳阳威，刘宝杰. 跨音压气机确定应力场分析[J]. 航空学报， 2007, 28(S1):1-6. LIU Yangwei, LIU Baojie. Analysis of deterministic stresses in a transonic compressor[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(S1):1-6. Cited in this article [1]

[13]	KÖLLER U, MONIG R, KUSTERS B, et al. 1999 turbomachinery committee best paper award: development of advanced compressor airfoils for heavy-duty gas turbines, part Ⅰ： design and optimization[J]. Journal of Turbomachinery, 2000, 122(3):397-405. Cited in this article [1]

[14]	KÜSTERS B, SCHREIBER H-A, KOLLER U, et al. 1999 turbomachinery committee best paper award: Development of advanced compressor airfoils for heavy-duty gas turbines, part Ⅱ： experimental and theoretical analysis[J]. Journal of Turbomachinery, 2000, 122(3):406-414. Cited in this article [1]

[15]	刘波，周新海，严汝群. 轴流压气机可控扩散叶型的数值优化设计[J]. 航空动力学报， 1991, 6(1):9-12, 89. LIU Bo, ZHOU Xinhai, YAN Ruqun. Numerical optimization program for designing controlled diffusion compressor bladeing[J]. Journal of Aerospace Power, 1991, 6(1):9-12, 89. Cited in this article [1]

[16]	程荣辉，仲永兴，严汝群. 大弯度可控扩散叶型叶栅槽道中气体流动的试验研究[J]. 航空动力学报， 1993, 8(3):221-224, 306. CHENG Ronghui, ZHONG Yongxing, YAN Ruqun. Investigation of flows in a controlled diffusion airfoll cascade passage[J]. Journal of Aerospace Power, 1993, 8(3):221-224, 306. Cited in this article [1]

[17]	程荣辉，周拜豪，余华蔚，等. 定制叶型技术及其在压气机设计中的应用[J]. 燃气涡轮试验与研究， 2000, 13(1):15-22. Cited in this article [1]

[18]	周亚峰. 可控扩散叶栅设计与试验[J]. 航空发动机， 1994(3):8-27. Cited in this article [1]

[19]	李泯江，祁祎，邓宝洋，等. 高负荷跨音压气机转子ATS-3气动设计[J]. 航空动力学报， 2002, 17(2):183-187. LI Minjiang, QI Wei, DENG Baoyang, et al. Aerodynamic design of high load transonic compressor stage[J]. Journal of Aerospace Power, 2002, 17(2):183-187. Cited in this article [1]

[20]	赵峰，桂幸民. 低雷诺数效应对某可控扩散叶型性能的影响[J]. 航空动力学报， 2006, 21(2):285-289. ZHAO Feng, GUI Xingmin. The low reynolds number effects on the performance of some controlled diffusion airfoils[J]. Journal of Aerospace Power, 2006, 21(2):285-289. Cited in this article [1]

[21]	柯婷凤，郑群，明玉周. 某三级轴流式低速压气机零级气动优化设计[J]. 机械工程学报， 2011, 47(6):160-167. KE Tingfeng, ZHENG Qun, MING Yuzhou. Aerodynamic design and optimization of zero-stage for three-stage axial-flow low-speed compressor[J]. Journal of Mechanical Engineering, 2011, 47(6):160-167. Cited in this article [1]

[22]	EGARTNER W. Working range optimization for turbine and compressor blading[J]. Journal of Computational and Applied Mathematics, 2000, 120(1):59-65. Cited in this article [1]

[23]	OBAYASHI S, TSUKAHARA T, NAKAMURA T. Multiobjective genetic algorithm applied to aerodynamic design of cascade airfoils[J]. IEEE Transactions on Industrial Electronics, 2000, 47(1):211-216. Cited in this article [1]

[24]	KORAKIANITIS T, HAMAKHAN I A, REZAIENIA M A, et al. Design of high-efficiency turbomachinery blades for energy conversion devices with the three-dimensional prescribed surface curvature distribution blade design (CIRCLE) method[J]. Applied Energy, 2011, 89(1):215-227. Cited in this article [1]

[25]	KORAKIANITIS T, HAMAKHAN I A, REZAIENIA M A, et al. Two- and three-dimensional prescribed surface curvature distribution blade design (CIRCLE) method for the design of high efficiency turbines, compressors, and isolated airfoils[C]//ASME Turbo Expo, Vancouver, 2011. Cited in this article [1]

[26]	SOMMER L, BESTLE D. Curvature driven two-dimensional multi-objective optimization of compressor blade sections[J]. Aerospace Science and Technology, 2011, 15(4):334-342. Cited in this article [1]

[27]	周正贵. 压气机叶片自动优化设计[J]. 航空动力学报， 2002, 17(3):197-200. ZHOU Zhenggui. Automatic design optimization of compressor blades[J]. Journal of Aerospace Power, 2002, 17(3):197-200. Cited in this article [1]

[28]	周正贵. 高亚声速压气机叶片优化设计[J]. 推进技术， 2004, 25(1):58-61. ZHOU Zhenggui. Optimization of high subsonic axial compressor blades[J]. Journal of Propulsion Technology, 2004, 25(1):58-61. Cited in this article [1]

[29]	李军，邓清华，丰镇平. 基于进化算法的压气机叶型多目标优化设计[J]. 中国电机工程学报， 2004, 24(10):205-209. LI Jun, DENG Qinghua, FENG Zhenping. Multiobjective optimization design of a compressor airfoil using evolutionary algorithms[J]. Proceedings of the CSEE, 2004, 24(10):205-209. Cited in this article [1]

[30]	汪光文，周正贵，胡骏. 基于并行遗传算法压气机叶片自动优化设计[J]. 航空动力学报， 2006, 21(5):924-929. WANG Guangwen, ZHOU Zhenggui, HU Jun. Design optimization of compressor blades using parallel genetic algorithms[J]. Journal of Aerospace Power, 2006, 21(5):924-929. Cited in this article [1]

[31]	赵鹏程，刘波，宣扬，等. 基于遗传算法的压气机叶型优化设计[J]. 航空计算技术， 2011, 41(6):12-15. ZHAO Pengcheng, LIU Bo, XUAN Yang, et al. Design optimization of compressor blades based on genetic algorithm[J]. Aeronautical Computing Technique, 2011, 41(6):12-15. Cited in this article [1]

[32]	金东海，陈佳，桂幸民. 压气机叶栅多点气动优化设计[J]. 推进技术， 2007, 28(4):367-372. JIN Donghai, CHEN Jia, GUI Xingmin. Multi-point aerodynamic design optimization for compressor cascade airfoils[J]. Journal of Propulsion Technology, 2007, 28(4):367-372. Cited in this article [1]

[33]	ZANNETTI L. Time-dependent method to solve the inverse problem for internal flows[J]. AIAA Journal, 1980, 18(7):754-758. Cited in this article [1]

[34]	THOMPKINS J W T, TONG S S. Inverse or design calculations for nonpotential flow in turbomachinery blade passages[J]. Journal of Engineering for Power, 1982, 104(2):281-285. Cited in this article [1]

[35]	SANZ J. Automated design of controlled-diffusion blades[J]. Journal of Turbomachinery, 1988, 110(4):540-544. Cited in this article [1]

[36]	DANG T. Inverse method for turbomachine blades using shock-capturing techniques[C]//Proceedings of AIAA, ASME, SAE, and ASEE, Joint Propulsion Conference and Exhibit, 31 st, San Diego, CA. 1995. Cited in this article [1]

[37]	HIELD P. Semi-inverse design applied to an eight stage transonic axial flow compressor[C]//ASME Turbo Expo, Berlin, 2008. Cited in this article [1]

[38]	刘秋生，沈孟育. 平面跨音速叶栅正、反混合问题的一种高效率解法[J]. 力学学报， 1988, 20(4):289-296. Cited in this article [1]

[39]	KOCH C, SMITH J L. Loss sources and magnitudes in axial-flow compressors[J]. Journal of Engineering for Power, 1976, 98(3):411. Cited in this article [1]

[40]	WISLER D C. Loss reduction in axial-flow compressors through low-speed model testing[J]. Journal of Engineering for Gas Turbines and Power, 1985, 107(2):354-363. Cited in this article [1]

[41]	SMITH J L H, YEH H. Sweep and dihedral effects in axial-flow turbomachinery[J]. Journal of Basic Engineering, 1963, 85(3):401-405. Cited in this article [1]

[42]	WEINGOLD H D, NEUBERT R J, BEHLKE R F, et al. Bowed stators: an example of CFD applied to improve multistage compressor efficiency[J]. Journal of Turbomachinery, 1997, 119(2):161-168. Cited in this article [1]

[43]	王仲奇，郑严. 叶轮机械弯扭叶片的研究现状及发展趋势[J]. 中国工程科学， 2000, 2(6):40-48. WANG Zhongqi, ZHENG Yan. Research status and development of the bowed-twisted blade for turbomachines[J]. Engineering Sciences, 2000, 2(6):40-48. Cited in this article [1]

[44]	GÜMMER V, WENGER U, KAU H P. Using sweep and dihedral to control three-dimensional flow in transonic stators of axial compressors[J]. Journal of Turbomachinery, 2001, 123(1):40-48. Cited in this article [1]

[45]	FISCHER A, RIESS W, SEUME J R. Performance of strongly bowed stators in a four-stage high-speed compressor[J]. Journal of Turbomachinery, 2004, 126(3):333-338. Cited in this article [1]

[46]	HOEGER M, SIEVERS N, LAWERENZ M. On the performance of compressor blades with contoured end-walls[C]//The 4th European Conference on Turbomachinery, Florence. 2001: 711-720. Cited in this article [1]

[47]	HOEGER M, CARDAMONE P, FOTTNER L. Influence of endwall contouring on the transonic flow in a compressor blade[C]//ASME Turbo Expo, Amsterdam, 2002. Cited in this article [1]

[48]	DORFNER C, HERGT A, NICKE E, et al. Advanced nonaxisymmetric endwall contouring for axial compressors by generating an aerodynamic separator, part Ⅰ： principal cascade design and compressor application[J]. Journal of Turbomachinery, 2011, 133(2):1-6. Cited in this article [1]

[49]	卢家玲，楚武利，刘志伟，等. 轴流压气机非轴对称机匣造型的研究[J]. 工程热物理学报， 2009, 30(2):209-213. LU Jialing, CHU Wuli, LIU Zhiwei, et al. Nonaxisymmetric casing on axial flow compressors[J]. Journal of Engineering Thermophysics, 2009, 30(2):209-213. Cited in this article [1]

[50]

胡书珍，卢新根，张宏武，等. 亚音速轴流压气机转子非轴对称轮毂端壁的数值研究[J]. 工程热物理学报， 2009, 30(3):385-388. HU Shuzhen, LU Xingen, ZHANG Hongwu, et al. Numerical investigation on a subsonic axial-flow compressor rotor with the implementation of non-axiasymmetric hub end wall[J]. Journal of Engineering Thermophysics, 2009, 30(3):385-388. Cited in this article [1]

[51]	徐全勇，侯安平，李绍斌，等. 轮毂曲线对跨声速压气机转子性能的影响[J]. 工程热物理学报， 2009, 30(5):761-764. XU Quanyong, HOU Anping, LI Shaobin, et al. Influences of hub design on rotor performance in transonic compressor[J]. Journal of Engineering Thermophysics, 2009, 30(5):761-764. Cited in this article [1]

[52]	李秋实，杨春，肖文富，等. 端壁造型抑制角区失速的数值研究[J]. 自然科学进展， 2009, 19(5):537-543. Cited in this article [1]

[53]	刘波，曹志远，黄建，等. 跨声速轴流压气机非轴对称端壁造型优化设计[J]. 推进技术， 2012, 33(5):689-694. LIU Bo, CAO Zhiyuan, HUANG Jian, et al. Design optimization for a transonic compressor with implementation of non-axisymmetric endwall contouring[J]. Journal of Propulsion Technology, 2012, 33(5):689-694. Cited in this article [1]

[54]	李兰攀，楚武利，张皓光. 端壁倒圆对高负荷压气机叶栅性能及流场影响的机理探究[J]. 推进技术， 2017, 38(12):1-10. LI Lanpan, CHU Wuli, ZHANG Haoguang. Mechanism study of end-wall fillet's influence on performance and flow field of high-load compressor cascade[J]. Journal of Propulsion Technology, 2017, 38(12):1-10. Cited in this article [1]

[55]	WADIA A, BEACHER B. Three-dimensional relief in turbomachinery blading[J]. Journal of Turbomachinery, 1990, 112(4):587-598. Cited in this article [1]