A Random Forest Fault Diagnosis Method for Photovoltaic Arrays Based on Multi-feature Optimization Mechanism and OOB Optimization

LUO Shoukang1, WEN Kehuan1, ZHANG Yubo1, SUN Xiaojia1, LI Yang1, SUN Wenjing1, LI Tianfeng2

Distributed Energy ›› 0

PDF(1616 KB)
PDF(1616 KB)
Distributed Energy ›› 0 DOI: 10.16513/j.2096-2185.DE.26100426

A Random Forest Fault Diagnosis Method for Photovoltaic Arrays Based on Multi-feature Optimization Mechanism and OOB Optimization

  • LUO Shoukang1, WEN Kehuan1, ZHANG Yubo1, SUN Xiaojia1, LI Yang1, SUN Wenjing1, LI Tianfeng2*
Author information +
History +

Abstract

To address the frequent faults in distributed photovoltaic (PV) arrays and the limitations of traditional random forest (RF) methods in diagnostic accuracy and generalization capability, this paper proposes a fault diagnosis method based
on  RF  that  integrates  multi-feature  optimization  and  dynamic  out-of-bag  (OOB)  error  optimization.  First,  a  PV  array simulation model is constructed in MATLAB/Simulink based on the single-diode equivalent circuit of a PV cell. The model simulates five typical fault types, including short circuit, open circuit, partial shading, aging degradation, and bypass diode failure, and extracts multi-dimensional fault features covering voltage, current, and power etc. Furthermore, the OOB error is introduced as a dynamic evaluation metric during model training to monitor and optimize the ensemble strategy of base learners  in  real  time,  thereby  improving  convergence  performance  and  generalization  capability.  Simultaneously,  a  twostage multi-feature optimization strategy—“permutation importance preliminary screening + principal component analysis secondary  dimensionality  reduction”—is  adopted  to  screen  the  most  critical  fault  feature  subset  from  the  original  highdimensional  features,  enhancing  model  robustness.  Experimental  results  demonstrate  that  the  proposed  OOB-RF  model achieves  a  fault  diagnosis  accuracy  of  95.44%  on  the  test  set,  which  is  8.12  percentage  points  higher  than  that  of  the traditional RF model, while the overfitting index is significantly reduced by 51.26%. The proposed method exhibits superior classification  accuracy  and  stability,  providing  an  effective  solution  for  the  intelligent  operation  and maintenance  of distributed PV systems.

Key words

photovoltaic  / array / fault  / diagnosis / random  / forest  / (RF)  / algorithm / out-of-bag  / (OOB)  / error / multi-feature optimization

Cite this article

Download Citations
LUO Shoukang1, WEN Kehuan1, ZHANG Yubo1, SUN Xiaojia1, LI Yang1, SUN Wenjing1, LI Tianfeng2. A Random Forest Fault Diagnosis Method for Photovoltaic Arrays Based on Multi-feature Optimization Mechanism and OOB Optimization[J]. Distributed Energy, 0 https://doi.org/10.16513/j.2096-2185.DE.26100426.

Funding

Innovation Project of China Southern Power Grid Co., Ltd. (No. SZKJXM20222146)
PDF(1616 KB)

Accesses

Citation

Detail

Sections
Recommended

/

〈 〉